how do i use the 4×4 on a 2006 jeep wrangler?

I own a 2006 Jeep wrangler SE. I’m just wondering how i put to use the 4×4 option.

,

3 Responses to how do i use the 4×4 on a 2006 jeep wrangler?

  1. Ashlee July 3, 2010 at 10:17 am #

    http://www.jeep.com/en/4×4/

    This is a link to the Jeep.com 4×4 Basics page. You will find lots of info from which type of 4X4 systems and how they work and there is an offroad driving guide. That will explain the basics like when to use what range etc. The other thing that was already suggested is to join a jeep or 4×4 club.

  2. rick b July 3, 2010 at 10:17 am #

    Read the instructions on the drivers sun visor or read the owners manual. Then go join a Jeep club

  3. thedesertoutlaw July 3, 2010 at 10:17 am #

    Park your Jeep on dirt (not the street).
    Put your foot on the clutch, shift into neutral, and pull up the 4×4 lever
    Select either 4Hi or 4Lo with your foot still on the clutch.
    Shift into Drive
    Let out the clutch, and you are now in 4WD. (Yay!)

    Don’t forget to shift out of 4WD before going back on pavement. But, if you live in snow country, that might not be an issue in snowy conditions.