how to convert 4 wheel drive transmission to 2 wheel drive transmission and parts required?

have good transmission from gm 4×4 to install in gm 2 wheel drive, how to convert and wha parts are required

, , ,

4 Responses to how to convert 4 wheel drive transmission to 2 wheel drive transmission and parts required?

  1. doornobk October 16, 2010 at 12:04 am #

    It depends on the year and model. The biggest hangup is that usually the output shaft has to be changed. The output shaft is the first thing to go into the case which means everything else has to come out to get to it.

  2. garylee October 16, 2010 at 12:04 am #

    It would be a lot cheaper to just trade vehicles.

  3. bandit_60 October 16, 2010 at 12:04 am #

    if you have a 4×4 transmission and you want to put it in a 2 wheel drive then you have to drop the transfer case and change the tail shaft. take the transfer case off, change the shaft and housing. make sure the mount will bolt up. if it don,t want to line up you might have to mover the cross member up or back some to line the mount up.

  4. ELVIN RUIZ March 3, 2011 at 3:07 pm #

    I NEED TO KNOW IF THE TRANSMISSION OF 1999 3500 FIT ON A 1996 CHEVY 3500