have good transmission from gm 4×4 to install in gm 2 wheel drive, how to convert and wha parts are required
Tags: 4x4, gm, wheel, wheel drive
4x4 How-to. You can follow any responses to this entry through the RSS 2.0 feed.You can leave a response, or trackback from your own site.
It depends on the year and model. The biggest hangup is that usually the output shaft has to be changed. The output shaft is the first thing to go into the case which means everything else has to come out to get to it.
It would be a lot cheaper to just trade vehicles.
if you have a 4×4 transmission and you want to put it in a 2 wheel drive then you have to drop the transfer case and change the tail shaft. take the transfer case off, change the shaft and housing. make sure the mount will bolt up. if it don,t want to line up you might have to mover the cross member up or back some to line the mount up.
I NEED TO KNOW IF THE TRANSMISSION OF 1999 3500 FIT ON A 1996 CHEVY 3500
Mail (will not be published) (required)